Xov xwm

How To Set Up KMM300 Milling Machine

Aug 07, 2023 Tso lus

According to the characteristics of on-site processing site, the machine tool can be directly fixed by the magnetic base. Use a wrench to rotate the magnetic base switch to attach the magnetic base to the workpiece, thereby fixing the machine tool.

To feed in the Z-axis direction and adjust the amount of knife, you need to loosen the spindle sleeve locking screw first, and rotate the Z-axis leadscrew through a wrench. The movement stroke can refer to the dial, and each small scale is 0.05mm. After adjusting the position of the milling cutter, the spindle locking screw on the side of the spindle needs to be locked before the work is done to prevent the displacement of the spindle from causing unqualified workpieces.

The maximum cutting amount of the milling machine should not exceed 1 mm, otherwise it may cause irreversible damage to the tool and spindle.

Power-on

The milling feeds of the X and Y axes are manually driven by the rotating hand wheel. Rotate the X-axis handwheel, the cutter head will move 3mm along the X-axis every time the handwheel rotates one turn. Rotate the Y-axis handwheel, the cutter head will move 1mm along the Y-axis every time the handwheel ratates one turn.

news-1000-1000news-1000-1000

 

 

Xa kev nug